Rolleicord Repairs
If you would like your Rolleicord TLR (twin lens reflex) camera repaired please fill out the contact form at the bottom of the page. We currently offer repairs on the following models:
- Rolleicord V
- Rolleicord Va
- Rolleicord Vb
Please note we are unable to work on cameras from outside of the UK.
Troubleshooting:
Incorrect slow speeds
Set your shutter to 1 second and fire the shutter. You should here a smooth clockwork like noise from when the shutter opens until it closes. If the shutter stays open for more than 1 second it is likely that the slow speed escapement needs servicing.
Shutter will not fire
If after cocking the shutter it will not fire of the shutter blades do not open it is likely that the shutter blades are contaminated with oil. This is a common issue with older cameras caused by oil migrating from other areas of the camera. The shutter needs to be disassembled and the individual blades cleaned.
Self timer is stuck
If you have set your self timer and now the shutter does not fire it is likely that the self timer mechanism needs to be repaired. Please do not try and force the self timer lever, this can cause more damage to the mechanism and make repairing it more difficult.
Synchro Compur Shutter Servicing
If your camera has any of the issues listed above then you will need to have the shutter serviced this typically costs £180. During servicing the shutter is completely dismantled, cleaned, lubricated and adjusted during reassembly. The slow speed escapement, self timer and some other parts go through a 3 stage ultrasonic bath. The shutter blades are removed and individually cleaned to remove any contaminants. During the service we will also clean the lenses, mirror and focus screen to help removed any dust, dirt and fungus.
New Mirrors
The mirrors used in TLRs for viewing your composition as vulnerable to damage from fungus, dirt or simply due to their age. We have a stock of brand new replacement mirrors that can be fitted.
Cost: Part (£25) + Labour (£15)
New front leather
The leather on the front of your camera will need to be removed so that the shutter can be accessed. We try out best to preserve the original finish as best we can but sometimes it is not possible. We can fit new pre-cut leather finishes for £25.